Product range





 



 

The SF Flange clamp is designed to clamp onto a steelwork flange and provide a suspension point for supporting building services. It has a front clamping screw with a cup point that bites into the steel and is then locked in place with a locknut to ensure a secure fixing to the steel. The back hole of the clamp can be tapped or have a clearance hole to accept threaded bar of M06, M08, M10 & M12 sizes.

The threaded bar is used to suspend all types of building services such as sprinkler systems, HVAC systems, cable trays and suspended ceilings. The M10 and M12 version are approved for use by Factory Mutual (FM), a third party approval body that is recognized around the world for approvals of products related to fire protection.

· FM Approved (M10 & M12 types)
· Drilled or tapped suspension hole in all sizes
· Suits M06, M08, M10 or M12 threaded bar
 
FINISH: Zinc Plated to BS EN 12329:2000 Grade Fe//Zn8//A (Clear)
MATERIAL: Cast iron to BS EN 1562 & 1563: Grade EN-GJS-300-6 / 450-10

 


Note: Please refer to the full catalog for
detailed installation instructions. 		 
 
All of the loads below have been subject to a 3:1 Factor of Safety.

Product
code		 A
(mm)		 B
(mm)		 C
(mm)		 D
(mm)		 E
(mm)		 F
(mm)		 Approved Tensile load in line
with ROD (kN)
SF1Z06D 19 7 36.5 M08x35 42.5 18.5 N/A 1.80
SF1Z06T 19 M06 36.5 M08x35 42.5 18.5 N/A 1.80
SF1Z08D 19 9 36.5 M08x35 42.5 18.5 N/A 1.80
SF1Z08T 19 M08 36.5 M08x35 42.5 18.5 N/A 1.80
SF2Z10D 20.5 11 42.5 M10x40 43.5 21.5 FM 2.18
SF2Z10T 20.5 M10 42.5 M10x40 43.5 21.5 FM 2.18
SF3Z12D 20.5 M12 54 M10x40 59.5 21.5 FM 5.63
SF3Z12T 20.5 M12 54 M10x40 59.5 21.5 FM 5.63