Product range





 



 

The BL Flange Clamp is a versatile clamp used for a wide variety of applications. It can be used with clips and brackets underneath the nut and washer side for fixing conduit or even pipe work. It can also be used for fixing down the lids of pressure vessels or clamping steel together without the need for drilling or welding.

The fixing is tested for tensile and lateral loads, please see data sheet below. The recessed part is specifically designed to grip the head of a bolt or nut which means the clamp can always be fixed with one spanner only. The central bolt can be replaced with other threaded items such as threaded bar, eyebolts or J-bolts to provide a suspension element.

· Only requires one tool for installation
· Hot Dip Galvanised
· Can accommodate clips/brackets
· Extensive fixing range
· Tested for Tensile and Lateral loading
 
FINISH: Hot Dip Galvanised to BS : 1461
MATERIAL: Cast Steel to ASTM A27 : Grade 70 – 36

 

Note: Please refer to the full catalog for
detailed installation instructions. 		 
 

All of the loads below have been subject to a 3:1 Factor of Safety.

The Safe working loads are based on assemblies
tested in typical conditions for an individual clamp unless stated.

Product
code		 A
(mm)		 B
(mm)		 C
(mm)		 D
(mm)		 Tightening torque
(Nm)		 Tensile load in line
with rod (kN)		 Tensile load at nose
(kN) (per pair)		 Lateral Loads
(kN)
BL1G08A 12.5 45 40 0 to 20 10 1.0 3.3 0.25
BL1G10A 14 58 47 0 to 30 20 2.5 4.4 0.40
BL1G12A 15 65 51.5 0 to 35 40 5.0 5.0 0.60
BL1G16A 20 95 58 0 to 55 90 7.5 9.2 0.70
BL1G20A 23 116 66 0 to 70 180 9.0 10.5 0.75
BL1G24A 26 147 75 0 to 95 200 10.5 15.5 0.80
Do not exceed the Safe Working Load (SWL) specified.